NEW! PRODUCTS AT

Master Heaters 

LP-Gas Portable Forced Air Heaters

• Adjustable Height Angle • 10” Hose & Regulator Included • Fully Enclosed Gas Controls • Over-Heat Shut-Off • Continuous Electronic Ignition (MH-60V-GFA, MH-125V-GFA, MH-150V-GFA & MH-375T-GFA models) • Variable Heat Settings (MH-60V-GFA, MH-125V-GFA & MH150V-GFA models) • Built-In Thermostat (MH-375V-GFA model)

                                  MH-40-GFA                                                           MH-150V-GFA

LP-Gas Tank Top Heaters

• Wind Resistant • Safety Tip-Over Switch • Match Light Ignition • Radiant Style Heat • Rear Burner Safety Guard • Rust Proof Chrome Emitter Guard • Hose & Regulator Included • Swivel & Tilt Burner Heat (MH-32-TTC model)

                      MH-16-TTC                                             MH-32-TTC

LP-Gas Convection Heaters 

• 360^o Heating Radius • Inner Wind Guard • Quick Assembly 2-piece Burn Chamber • Auto-Piezo Ignition • 10’ Hose & Regulator Included • Over-Heat Shut-Off

Part no.	Max Heat Output (btu)	Heating Area (sq ft) Up To	Max Operating Hours		Order
MH-80V-LPC	80,000	2,000	36
MH-200V-LPC	200,000	5,000	31

Provide temporary heat at job sites. Quiet, odor free, compact, lightweight. Automatic flame-out safety shut-off valve. Includes hose and regulator. No electrical supply required.  

Part no.	BTU/hr.	Ignition	Heats Up To	Fuel Type		Order
TC200VA	75,000-200,000	Piezo Electric Pilot*	4,700 sq ft	LP-Gas
* Pilot will allow main burner to be turned on and off without relighting once the pilot has been  ignited

420 Wetline Gravity Fill Liquid Transfer - NEW!

The “Solution” Here it is! Teeco’s answer to the problem faced with smaller forklift accounts where cylinder exchange will not work and gravity fill is a necessity. Avoid conflicts with local codes and fire departments. Comply with safe handling requirements in a cost effective way for you and your customer.

Includes: 

• 420# ASME Tank from Worthington Cylinders, with Extended Foot Ring and 1 1/4” Liquid Bottom Outlet
• 1 ¼" RegO A3209D050 Internal Valve
• Pull Handle w/ Fuse Link
• RegO A2141A6L Pull Away Valve
• 15' ¾" Delivery Hose
• RegO A7793A Quick Acting Minimum Loss Hose End Valve

Part Number	Description		Order
WL-420	Gravity Fill Liquid Transfer System
327581	420# ASME Tank only (w/extended foot ring and 1 1/4” Liquid Bottom Outlet)

Next Generation AutoGas & TEECO Style LPG Dispenser Modules - NEW!

NEW! AutoGas Dispenser features a Smith GC-1LZ Pump (also available w/o pump) 1” Neptune meter with the remote printer capable MidCom Electronic Register and GG1-E Nozzle. Sleek new style and features make it perfect for AutoGas applications.
TEECO LPG dispensers feature a new aluminum diamond plated cabinet. Hinged top and front panels permit easy access to components. Top folds down. Cabinet locks securely in closed position. Standard equipment on all models includes: Corken or Smith pump, Neptune 1” meter and 600 series register, RegO pull-away valve, 15½’ LPG hose w/ hose-end valve and 1¾” ACME fill connector and automatic bypass valve. 

Options

Now Available!

·         Tank Package – ADM-1000

Does not include cabinet. Includes White Powder-Coated Leg Kit, Mounting of Tank and Dispenser Cabinet, all fittings and labor to plumb tank to cabinet.  All plumbing is painted and weld-supported.

 Next Generation Teeco Dispenser        Next Generation AutoGas Dispenser          ADM-6GC shown with ADM-1000 Tank Package

LP-Gas Cylinder Storage Cabinets 

American Standard Cylinder Storage Cabinets 

Features: Door Versatility - Zero clearance sliding door • reversible doors • Optional double doors • Signage - 20 lb Cylinder Cabinets include Propane Exchange Station, No Smoking, Exchange Checklist and 1-4-0 OSHA Diamond signage. •Forklift Cylinder Cabinets include Propane, No Smoking and 1-4-0 OSHA Diamond signage. Available Assembled or Unassembled.

                     LB12302MS                                        LB18302LS                                      AFH09302MS                                   AFH12302LS

D912 Series Electrically Isolated Pigtails for Underground Containers - NEW! 

These Pigtails are designed specifically for use on Underground LP-Gas Containers where dielectric isolation is necessary to protect the container. Features: Electrically insulated POL connection  • Heavy duty construction  • Individually soldered connection to copper tubing

6016RM Remote Cable Closure Kit for RegO Emergency Shutoff Valves - NEW!

Features • V-ring spring loaded pressure stem seal provides for leak-proof operation. No packing to retighten or replace. • Circular bridge in globe design and a dropped seat in the angle design achieve greater flow with less pressure drop. • Swivel seat disc assembly minimizes wear which provides for good alignment and long seat life. • ¼" F-NPT plugged holes on upstream and downstream sides of the valve. • Heavy duty rolled ACME stem threads provide quick action and long service life. • Seat Disc assembly incorporates an automatic back check valve, eliminating the need for a separate hydrostatic relief valve.

LV960 Series Flexible Vent Kit - NEW!

Designed to assist in meeting the point of discharge requirements for regulators in NFPA 58; it does this by diverting the LP-Gas vapor away from sources of ignition, openings to into direct vent appliances or mechanical air intakes.

Features • Tubing complies with NFPA 58 5.8.3.1 (3) this flexible tubing meets the requirements of UL 1660 "Liquid-Tight Flexible Nonmetallic Conduit". • Reusable nonmetallic end fittings comply with NFPA 58 5.8.3.1 (3) they meet the requirements of UL 514B, "Conduit Tubing and Cable Fittings". • The LV960 Series Adjustable Vent Kit can accommodate custom installations; the reusable ends can be removed and the tubing cut to the desired length and then reinstalled. • The Adjustable Vent Kit is supplied with two reusable end fittings installed on the flexible tubing, mounting bracket with self-tapping screw, 90 degree vent elbow and installation instructions.

Smart-Hose

DOT Certified 2" LPG Smart-Hose

DOT Certified 1 1/4" LPG Smart-Hose

Second Sun Tank Heater - NEW!

The SECOND SUN^TM flameless gas powered tank heater can help increase vaporization without needing to modify your piping system. It requires no electricity so it can be located off grid. Installs in minutes. 

How Does It Work?
The SECOND SUN^TM is a propane tank heater that operates based on tank pressure. The tank heater utilizes an adjustable operating pressure switch with a range of 55-100 psi. When the pressure in the storage tank falls below the operating switch set point the heater will cycle on providing heat into the liquid stored in the tank. When the pressure requirement is satisfied, the tank heater reverts to a standby mode. 
An integral 12V DC heater is used to initially start the SECOND SUN^TM. After being started, the power source is no longer required.

Applications
Boost pressure in the LPG storage tank • Increase tank vaporization • Replace a liquid pump in a vaporizer application • Boost pressure in a storage tank that has been overdrawn and refrigerated

Why The SECOND SUNTM ? • No Flame - no source of ignition! • Gas powered - utilizes propane vapor from the storage tank for operation of the heater and monitoring controls • Catalytic Heater - low temperature radiant heat will not overheat or harm the tank surface  • Self contained, off-grid operation • Adds 2.2 mm btu/hr of vaporization • Designed to fit 41”-84” diameter tanks, from 1,000 to 12,000 gallons • Simple, 2 person install. Easy to remove for tank and heater inspection • Meets hazardous location requirements • Heating System approved by Factory Mutual

Second Sun Tank Heater shown installed on tank (not included)

ASME Tank Accessories - NEW!

Winter Tank Protection

Maintain tank access and protect valuable equipment in winter weather

      Tank Armor (shown on tank, not included)        Snow Pole (shown on tank, not included)                        Snow Shield

Imported Gas Connectors, Fittings and Valves

• CSA tested and approved • Complies with ANSI Z21.75/CSA 6.27 Connectors for Outdoor Gas Appliances and Manufactured Homes • Complies with ANSI Z21.24/CSA 6.10 Connectors for Gas Appliances • ISO 9001 certified  • 100% factory leak tested • 3 Year Warranty • Lead Free • Tested to withstand over 25 times the required PSI    Stainless Steel Flexible Gas Connectors Heavy duty 304 stainless steel. Strong and flexible. CSA certified design. 100% factory leak tested.

Gas Connectors 1/2"OD, 3/8" ID Tubing w/ 1/2" Flare Nuts

Gas Connectors 5/8" OD, 1/2" ID Tubing w/ 15/16" Flare Nuts

Gas Connectors 3/8" OD, 1/4" ID Tubing w/ 3/8" Flare Nuts

Gas Connectors 1" OD, 3/4" ID Tubing w/1" Flare, Poly Coated

Connector End Fittings         

Item #	Description	D48 Series                              D46 Series	Order
D48S-88	1/2" Flare x 1/2" MIP, tapped 3/8" FIP
D46S-88	1/2" Flare x 1/2" FIP
D48S-158	15/16" Flare x 1/2" MIP, tapped 3/8" FIP
D46S-158	15/16" Flare x 1/2" FIP
D48S-1612	1" Flare x 3/4" MIP, tapped 1/2" FIP
D46S-1512	15/16" Flare x 3/4" FIP

Gas Ball Valves                                   

Item #	Description	D89B Series                           D89F Series	Order
D89B-68	3/8" Flare x 1/2" FIP
D89B-88	1/2" Flare x 1/2" FIP
D89B-158	15/16" Flare x 1/2" FIP
D89B-1512	15/16" Flare x 3/4" FIP
D89F-8	1/2" FIP x 1/2" FIP
D89F-12	3/4" FIP x 3/4" FIP

New Low Emission ACME Connectors 6588LE & 6589LE For Transports and Bobtails 

Features: • 3-1/4” Male Acme Connector with reduced emissions, 90% less than current ECII ACME adapters. • 10.5 cubic centimeters of liquid discharged at disconnect • UL Listed as a Filler Valve. • Safety groove is designed to shear below ACME threads leaving the valve seat closed and unaffected if the vehicle pulls away with the hose connected. • Seat disc is made of synthetic composition and is mechanically held in place by a seat disc retainer. • Stainless Steel return spring. • One- piece poppet stem for smooth operation. • Will connect to any standard female 3-1/4” ACME adapter. • Hydrostatic relief valve included (3125L). 

Part Number	ACME Connection	Outlet Connection M.NPT	Wrench Flats	Hydrostatic Relief Valve	Propane Capacity at Various Differential Pressures (GPM)				Order
					5 PSIG	10 PSIG	25 PSIG
6588LE	3 1/4"	2"	3"	3125L	138	223	349
6589LE	3 1/4"	3"	3 1/4"	3125L

NEW! 7573-20 Vapor Equalizing Adapter for 1 1/4" ACME Vapor Equalizing Valves

The 7573-20 is designed for use with RegO Multivalves® that utilize a vapor equalizing port and 7573 series vapor equalizing valves. The adapter’s operating handle opens and closes the upper check stem in the vapor equalizing valve after the ACME connection is completely made up. This adapter is designed to eliminate the need for gas flow from the vapor equalizing valve whenever the adapter is installed or removed. A shutoff valve, such as a full port ball valve or globe valve must be installed before the 7573-20 adapter to stop gas flow when the adapter is not connected.

 Features • Designed to seat against the gasket in the vapor equalizing valve for a gas tight seal • Adapter can be installed without depressing the upper check of the vapor equalizing valve. • Designed to eliminate the need to gas discharge when connection or disconnecting from the vapor equalizing valve. • Built in bleeder valve allows for controlled discharge of vapor before removing the adapter from the vapor equalizing valve.

Part Number	Inlet Connection	Outlet Connection	Approximate Length	Approximate Width	Shown with Multivalve (not included)	Order
7573-20	1 1/4" F ACME	3/4" M NPT	4 7/16"	2 3/8"

NEW! 7580F-20 Liquid Evacuation Adapter for older design 7572FC & 7580FC Check-Lok Valves

Designed for use with RegO 7572FC and 7580FC Chek-Lok® Actuated Liquid withdrawal Excess Flow Valves. The adapter’s operating handle opens and closes the equalizing stem in these older style Chek-Lok valves. This adapter is designed to eliminate the need for gas flow from the Chek-Lok® when the adapter is installed or removed. A shutoff valve, such as a full port ball valve must be installed at the outlet of the 7580F-20 adapter. Features • Built in nylon gasket provides a gas tight seal • Adapter can be installed without depressing the equalizing stem of the Chek-Lok. ® • Design eliminates the need to slug the excess flow feature of the Chek-Lok® when removing the adapter. 

Part Number	Inlet Connection	Outlet Connection	Approximate Length	Wrench Hex Flats	Shown with Check-Lok (not included)	Order
7580F-20	3/4" M NPT	3/4" F NPT	4 9/32"	1 3/8"

RegO Ready to Go

Valves come with Presto-Tap fitting to provide a cost efficient and simple method of quickly and easily performing system pressure checks. 

NEW! Bosch Tankless Water Heaters

The Benefits of Going Tankless
Most North American consumers currently use storage tank water heaters to provide domestic hot water, using energy to keep water hot 24 hours a day, even while away from home or sleeping. However, a tankless water heater heats water only when it’s needed, making it significantly more energy efficient than storage tank models. All models featured below are CSA approved and available in LP-Gas or Natural Gas.

Piezo Ignition Units

Bosch Therm 4000 - 330PN Series 
This small gas tankless water heater is ideal for cottages, camps, and other specific applications where a small volume of hot water is desired. Compact size saves valuable floor space. 

Bosch Therm 4000 - 520PN Series 
Provides endless hot water for 1 major application at a time

Hydro-Generated Unit
Bosch Therm 6000 - 520HN Series
Patented Bosch Hydro-Generated Ignition Technology: The pilot is ignited by a super-concentrated spark generated by a micro-turbine. which is activated by a request for hot water in the house. Energy efficient technology to maximize energy savings. 

Electric Ignition Unit

Bosch Therm Condensing - C950, C1050 and C1210 Series
The new model offers a flow rate of up to 12.1 gpm, 98% efficiency, and the most advanced features in tankless technology. It is designed to cascade for increased flow rates and will accommodate recirculating applications as well.

Bosch Tankless Water Heater Accessories

TOTUM Heat - Light - Sound Patio Heater

The New HLS Heater connects to laptop or MP3 player to provide hours of music and light along with exceptional heating.

• Radiant Black Tube Heating

• 34,000 BTU's/hr
• Sleek Design, LED Color Mood Lights
• MP3 Player Connectivity
• High Quality Outdoor Speakers
• Synchronize Music and Lights in to up to 50 Units
• Wireless Capability with Rechargeable Batteries (must purchase heater with battery pack for wireless option)

Shipping Weight: 118 lbs

Shipping Dimensions: 75.2"l x 27.2"w x 17.1"h

Item #	Description		Order
HLS-09	Totum Patio Heater with Wireless Battery Pack Fully Portable heat, light and sound
HLS-09-01	Totum Patio Heater only  (must be plugged in to outlet for light & sound)
HLS-09C	Heater Cover
HLS-09BP	Additional Battery Pack (Battery & Charger)
P053	Additional Battery Only
Y053	Additional Charger Only