|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Carburetion- Alternate Fuels Carburetion - Carburetors, Mixers>>Page P-1
|
|
|
|
55 Series Carburetors
The standard model can be mounted on either an updraft, downdraft, or side draft orientation, supplying either LPG or natural gas to engines from 1.5 to 70 HP. Maximum flow rate is 115 cfm. Various SEA flanges and air horn sizes available. Technical Info.
|
Part no |
Description |
|
|
Model 55 Series Carburetor |
||
|
CA55-271 |
Carburetor, 1" SAE flange, A2-65-2 straight air horn, long shaft, return spring bracket |
|
|
CA55-524 |
Carburetor, 1" SAE flange, Toyota, Straight draft |
|
|
CA55-542 |
Carburetor, 1" SAE flange, Toyota, Straight draft |
|
|
CA55-553 |
Carburetor, 1" SAE flange, w/A2-65 & A3-113 adapters, Toyota, Straight draft |
|
|
CA55-576 |
Carburetor, Hyster special flange, 43mm air horn, short lever w/throttle return |
|
|
CA55-577 |
Carburetor, 53mm flange, 43mm air horn, standard flow, Straight draft |
|
|
CA55-596-2 |
Carburetor, 1¼" SAE flange, A2-61 air horn, tapped 8mm, Mitsubishi, Straight draft |
|
|
CA55-598-2 |
Carburetor, 1¼" SAE flange, A2-61-2 air horn, tapped 8mm, Clark, Straight draft |
|
|
CA55-599-2 |
Carburetor, 1¼" SAE flange, 2¼" air horn, tapped 8mm less levers, Straight draft |
|
|
CA55-754L |
Mixer, 1-7/8" SAE flange, 1-7/8" air horn, w/lifter |
|
|
CA55-756L |
Carburetor, 2-1/16" air horn, 2-1/16" hose, dual fuel, with lifter, Straight draft |
|
|
CA55-758L |
Carburetor, 2-5/16" air horn, 2-5/16" hose, dual fuel, with lifter Straight draft |
|
|
CA55M-1 |
Mixer, 1-1/2" air horn |
|
|
CA55M-1-2 |
Mixer, 1-1/2" air horn |
|
|
CA55M-2 |
Mixer, 1-5/8" air horn |
|
|
CA55M-4 |
Mixer, 1-7/8" air horn |
|
|
CA55M-5 |
Mixer, 2-1/16" air horn |
|
|
CA55M-500 |
Series 500, straight draft mixer |
|
100 Series Carburetors
For automotive and industrial operations of LP-Gas, natural gas or digester gas. Single diaphragm air-gas valve carburetor/mixer. 90° air inlet provides low overhead clearance. Available with several air horn and body options. Rated to 106-123 HP. Technical Info.
|
Part no |
Description |
|
|
Model CA100 Series Carburetor/Mixer |
||
|
CA100M-2-2 |
Mixer, 1-7/8" air horn. lean flow silicone |
|
|
CA100M-3 |
Mixer, 2-1/16" air horn |
|
|
CA100M-3-2 |
Mixer, 2-1/16" air horn, lean flow, silicone |
|
|
CA100M-4 |
Mixer, 2-5/16" air horn |
|
|
CA100M-4-2 |
Mixer, 2-5/16" air horn, lean flow, silicone |
|
|
CA100M-5-2 |
Mixer, 1-5/8" air horn, silicone |
|
|
FB100M-4 |
Mixer, 2-5/16" air horn, feedback |
|
125 Series Carburetors
For automotive and industrial operation of LP-Gas, natural gas, or digester gas. Single diaphragm air-gas valve carburetor/mixer. Offers a downdraft air inlet that can be used for remote air filtration or open element type filters. Rated to 126-146 HP. Technical Info.
|
Part no |
Description |
|
|
CA125 Series Carburetor/Mixer |
||
|
CA125M-2 |
Mixer with silicone diaphragm |
|
|
CA125-75 |
Mixer with 1¼" SAE flange (short) 80mm air horn, lever w/ clamp on |
|
|
C125-76-2 |
Mixer with1¼" SAE flange (short), 80mm air horn, spring hole R, w/ AV1-14-76-2 |
|
|
CA125M-10-2 |
Mixer, Dual fuel, vacuum lift with silicone diaphragm |
|
|
FB125M-2 |
Mixer for feedback, with silicone diaphragm |
|
200 / FB200 Series Carburetor
The Model 200 Series is a single diaphragm air-valve carburetor / mixer. It offers a 90° air inlet to provide low overhead clearance. Available with several air horn and throttle valve options. Available for propane, natural gas and digester gas applications. It has been successfully used for other hydrocarbon-based vapor fuels as low as 500 BTU. Technical Info. Te-e-c-o
|
Part no |
Description |
|
|
Model FB200 Series |
||
|
FB200M-1-2 |
2-5/8" air horn with silicone diaphragm for ADP feedback system |
|
|
FB200M-2-2 |
3-1/16" air horn with silicone diaphragm for ADP feedback system |
|
Master Catalog>>Carburetion- Alternate Fuels Carburetion - Carburetors, Mixers>>Page P-1
|
|
|
|
