|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Cylinders, Tanks and Gauges>>Page N-8
|
|
|
|
Rochester Magnetel Gauges
6300 Series Magnetel Liquid Level Gauge
Liquid level gauges accurately determine the percentage of tank volume for most liquids in stationary bulk storage applications.
Head: Stainless steel.
Dial: Standard direct-read 4" and 8".
Gasket: Spiral-wound, Teflon filled, stainless steel.
Float: Stainless steel.
|
Part no. |
Description |
CALL FOR THIS ITEM |
|
**6336-† |
4", top mounting |
|
|
**6339-† |
4", side, end or angle mounting |
|
|
**6360-† |
8", top mounting |
|
|
**6342-† |
8", side, end or angle mounting |
|
|
**
Specify
prefix;
Dia:
P
-
propane,
5-95%,
A
-
NH3,
5-95%,
C
-
combination
LPG/NH3
Mounting:
X
-
Straddle,
Y
-
2"
opening,
M
-
Special
mobile,
V
-
Vertical |
||
M6300 Series Magnetel Rough Rider Liquid Level Gauge
Designed to stand the vibration and shock inherent in tank in transport and bobtail mobile service.
Head: Stainless steel.
Dial: Standard direct-read 4" & 8".
Gasket: Spiral-wound, teflon-filled, stainless steel.
Float: Stainless steel.
|
Part no. |
Description |
CALL FOR THIS ITEM |
|
CM6339-11-** |
4" dial, mobile LPG tanks up to 90" in diameter |
|
|
** Specify tank diameter |
||
Magnetel Ordering Information
1. Liquid product and specific gravity.
2. Type vessel, inside diameter (in inches) and head type (ellipsoidal, semi elliptical, hemispherical).
3. Prefix.
4. Part no. for mounting location (top, side, 8 “ or 4" dial).
5. Trim number.
6. Bolt hole location of mounting flange (centerline or straddle).
7. If other than standard percent of total volume dial is required.
8. Top-mounted gauges require dimension from mounting flange face to tank shell plus shell thickness.
9. Angle-mounted gauges require tank drawings for computing proper gauge dimensions.
Magnetel Parts and Accessories
Magnetel Mounting Flange
Tank mounting flanges are not included with Magnetel gauges and should be ordered separately. Note: Flanges welded to tank with top and bottom bolt holes on the vertical centerline are standard with Rochester gauges. When the flange is attached so that the bolt holes span the centerline (see drawing) add the prefix “X” to the Magnetel gauge model number.
Example: X6342-8
|
Part no. |
Description |
|
|
22-29 |
2-1/2" NPT threaded neck flange |
|
|
22-30 |
Forged steel welded flange |
|
|
22-500 |
3" weld neck |
Stud bolts (56-404) and nuts (44-403) are furnished with each Magnetel gauge. Cap screws (40-9) can be furnished on request.
Magnetel Weather Guard
|
Part no. |
Description |
|
|
23S-1 |
Weather cover, 8" |
|
|
23S-2 |
Weather guard, 4" |
|
|
23S-8 |
Weather guard, 8" |
Magnetel Parts
|
Part no. |
Description |
|
|
5-477 |
Dial, 4", 3% - 97%, all liquids |
|
|
5-478 |
Dial, 4", 3-97%, LPG |
|
|
5-1262 |
Dial, 4" Rough Rider, 5-95% |
|
|
5-481 |
Dial, 8", 3-97% |
|
|
15-11 |
Gasket, mounting flange, Buna-N |
|
|
15-451 |
Gasket, under 4" crystal |
|
|
93-403 |
Mounting bracket, for 8" dial chamber |
Master Catalog>>Cylinders, Tanks and Gauges>>Page N-8
|
|
|
|