Master Catalog>>Section L - Controls and Orifices>>Page L-5
|
|
|
 |
Pilot Ignition System
Eliminates the continuous burning pilot. Allows gas to flow/pilot to light only when the thermostat calls for heat. Manual reset model has thermal lockout switch. Small compact gas valve. No pilot relocation necessary. Simplified wiring harness. Universal mounting of the heat sensor. Easy installation to virtually all 24-volt AC natural gas-fired furnaces.
|
Part Number |
Description |
|
|
712-008 |
Natural or LP-gas lockout |
|
|
712-016 |
Natural gas non-lockout |
1810 Pilot Burner Kit
An aerated constant burning pilot which provides main burner ignition. Has reversible left/right bracket. Has natural orifice installed and LPG orifice included. Universal replacement for 1810-307 & 1810-309.
|
Part Number |
Description |
|
|
1810-100 |
1810 pilot kit |
1820 Replacement Pilot Kit
Replaces ITT-General PG9 style pilot. Comes w natural and LPG orifices. 500-600 MV, w/thermocouple.
|
Part Number |
Description |
|
|
1820-009 |
90° right |
|
|
1820-019 |
90° left |
|
|
1950-001 |
Replacement cartridge, 2-lead wire connector |
|
|
1951-001 |
Replacement cartridge, coaxial connector |
1830 Incinerator-Target Pilot
Aerated type pilots, combining features of incinerator and target type pilots.
|
Part Number |
Description |
|
|
1830-110 |
Mounting bracket type |
|
|
1830-210 |
Thermocouple mounting |
|
|
1830-310 |
Direction of pilot burner hood |
1890 Commercial Pilot Uni-kit
Commercial pilot kit to be used with a capillary type safety. Use with VS4020 and VS4030
|
Part Number |
Description |
|
|
1890-022 |
1/4" or 3/16" tube size |
1896 Horizontal
1896 pilots are used with the 4060 safety valves. Kit furnished with natural gas orifice installed. LPG orifice included.
|
Part Number |
Description |
|
|
1896-016 |
Use with MSA safety valve |
1898 Series Pilots
Use with 4060 MSA and MSC series safety valves.
|
Part Number |
Description |
|
|
1898-001 |
LH, Natural/LPG, MSA safety valve |
|
|
1898-005 |
RH, Natural/LPG, MSA safety valve |
|
|
1898-021 |
Natural/LPG, single tube pilot, MSC safety valves. |
41-400 Hot Surface Ignitors
For furnaces, boilers, rooftop heaters, unit heaters, water heaters and other type of HVAC equipment.
|
Part Number |
Description* |
|
|
41-401 |
Terminal block, 4½“ lead |
|
|
41-402 |
Wire nut, 19" lead |
|
|
41-403 |
Wire nut, 5½“ lead |
|
|
41-405 |
Wire nut, 5½“ lead |
|
|
41-406 |
Wire nut, 10½“ lead |
|
|
41-408 |
Terminal block, 4½" lead |
|
|
41-409 |
Terminal block, 4½" lead |
|
|
41-411 |
Terminal block, 4½" lead |
|
|
* Call for specific replacement application. |
||
Master Catalog>>Section L - Controls and Orifices>>Page L-5
|
|
|
|
