Master Catalog>>Section L - Controls and Orifices>>Page L-4
|
|
|
 |
1710 (TS Body) Gas Carrier
1710 series replacement bodies are used with the 1720 series replacement magnet heads in TS Automatic safety valve application. When a new 1710 replacement body is ordered, a new 1720 safety magnet must also be used.
|
Part Number |
Description |
|
|
1710-110 |
1/4" pipe inlet and outlet |
|
|
1710-111 |
3/8" pipe inlet and outlet |
|
|
1710-126 |
1/2" pipe inlet and outlet |
1720 (TS Magnet Heads) Replacement Safety
1720 series replacement magnets are used with DS1710 series bodies in TX automatic safety valve applications. Each kit magnet head is tapped for 1/8" pipe with fittings to adapt to 3/16" and 1/4" I.C. tubing. Pilot adjustment key is standard on each kit.
|
Part Number |
Description |
|
|
1720-801 |
Flow interruption |
|
|
1720-802 |
Flow interruption |
|
|
1720-714 |
No Flow interruption |
Robertshaw Water Heating Controls
110 Water Heating Regulation
Combination gas water heater thermostat. Designed for universal replacement. Use where main gas and pilot gas regulation is required. 160°F. Hi-Stop with 100% automatic pilot.
|
Part Number |
Description |
|
|
110-202 |
4.0" WC natural gas |
|
|
110-326 |
3.5" WC natural gas |
|
|
110-203 |
Convertible, 4.0" WC natural gas or 11" WC LP-gas |
110 Water Heating Energy Cut-Off “ECO” Kit
Designed with dual safety valves, ECO devices, and total regulation.
|
Part Number |
Description |
|
|
110-261 |
LPG, RH thread, 1/2" FPT |
|
|
110-265 |
LPG, LH thread, 1/2" FPT |
|
|
110-266 |
LPG, LH thread, 3/8" FPT |
120 Stock Tank Gas Valve
Hydraulic snap-action combination gas valve.
|
Part Number |
Description |
|
|
120-203 |
36° F. - 68° F. |
Honeywell Water Heating Controls
Aquastat Controllers
Immersion type hydronic controllers for limiting or regulating temperature of boiler water or liquid in tanks.
|
Part Number |
Description |
Order |
|
L4006A1678 |
High or low, 40°F. to 180°F. breaks |
|
|
L6006A1145 |
Circul., low or high, -100°F. to 240°F. SPDT |
Zone Valves
24V 2 wire - normally closed valve for hot water up to 240°F. at 20 psi. Motor pulls 9-6 VA. End switch for circulator makes when valve fully open.
|
Part Number |
Description |
|
|
V8043F-1036 |
3/4" sweat |
|
|
V8043F-1051 |
1" sweat |
Master Catalog>>Section L - Controls and Orifices>>Page L-4
|
|
|
|
