Part Number

Description

WR-900

1/4" compression connection to 1/2" x 20 thread, replacement for style X

Order

WR-901

1/8" FPT to 1/2" x 20 thread, replacement for style Y

WR-902

Elbow, 1/4" compression to 1/2" x 20 thread with swivel for swivel for adjusting through 360 degrees arc, replacement for Style Z

WR-903

1/4" compression connection to 7/16" x 20 thread, replacement for style U

WR-904

1/8" FPT to 7/16" x 20 thread, replacement for style V

WR-905

1/4" compression connection to 7/16" x 20 thread, elbow with swivel for adjusting through 180° arc, replacement for style W

WR-906

Swivel type pilot orifice fitting, 1/4" compression connection to 7/16" x 20 thread, replacement for fitting E-31.

Part Number

Description

CO-400-72

1/2" hex cap orifice, standard flat end, 3/8" x 27 thread, length 23/32", LP-72 drill

Order

CO-400-80

1/2" hex cap orifice, standard flat end, 3/8" x 27 thread, length 23/32", LP-80 drill

CO-401-72

1/2" hex cap orifice, standard flat end, 1/8" taper pipe thread, length 11/16", LP-72 drill

CO-401-80

1/2" hex cap orifice, standard flat end, 1/8" taper pipe thread, length 11/16", LP-80 drill

CO-402

1/2" hex cap orifice, standard flat end, 3/8" x 40 thread, length 111/16“, LP-72 drill

CO-403-72

1/2" hex cap orifice, standard counter bored end, 3/8" x 27 thread, length 3/4", LP-72 drill

Order

CO-403-80

1/2" hex cap orifice, standard counter bored end, 3/8" x 27 thread, length 3/4", LP-80 drill

CO-404

9/16" hex cap orifice, standard flat end, 1/2" x 27 thread, length 5/16", LP-72 drill

Order

CO-405

9/16" hex cap orifice, standard flat end, 1/2 x 20 thread, length 15/16", LP-72 drill

CO-406-72

1/2" hex cap orifice, standard flat end, 3/8" x 27 thread, length 13/16", LP-72 drill

CO-410

11/16" hex cap orifice, standard flat end, 9/16" x 24 thread, length 1-5/32", LP-72 drill

CO-414

1/2" hex cap orifice, 3/8" x 27 thread, length 1", LP-78 drill

Order

CO-415

9/16" hex cap orifice, standard flat end, 7/16" x 27 thread, length 57/64", LP-72 drill

Order