Master Catalog>>Section J - Heaters>>Page J-8

Detroit Radiant - Call to order from this product group.

HL2 Series - Two stage, low intensity, infra-red tube heater. 

Capable of operating in either a high fire mode (100% of rated input) or in a low fire mode (65%) of rated input. Its mode is dictated by momentary environmental demands, resulting in significant fuel savings over single stage infrared heaters. BTU inputs from 65 to 200 MBTU/hr. Natural or LP-Gas. Emitter lengths from 20 to 70 feet. Call for application and ordering information. 

DX2 Series - Top quality, single stage, low intensity,  infra-red tube heater. 

Using the unique burner design that is found in the HL2 Series, the DX2 Series is Detroit Radiant’s top of the line single stage, low-intensity heater. The burner allows this heater to efficiently use BTU inputs up to 200 MBTU/hr. and have emitter lengths from 20 to 80 feet. The true advantage of this burner is the improved heat distribution that it produces. Provisions for various configurations (U or L shaped patterns) are also available. This heater, available in natural or LP-Gas, also offers superior serviceability. Call for application and ordering information. 

XTS Series - Economical, single stage, low intensity, infra-red tube heater 

The XTS Series uses the same control technology as the DX2 Series, but in a more economical package. Offering fewer features than the DX2 Series, economy is also accomplished through the use of hot rolled steel radiant tubes. These heaters are available in straight, U-type, or L-configurations, 50 to 200 MBTU/hr., natural or LP-Gas, and 20 to 50 ft. Lengths. Call for application and ordering information. 

LD & LS Series 

Designed for low ceiling or select residential use, the LS and LD Series heaters are ideal for garages, patios, solariums, workshops, kennels, and other similar applications.  

LS Series' performance is enhanced through the use of a specially designed combustion burner, titanium combustion chamber and black coated, aluminized steel radiant tubes. The LD Series has all the features of the LS Series plus microprocessor controls designed to eliminate nuisance shutdowns with a 'soft-lockout' feature and an external LED Self-Diagnostic indicator light is provided to assist in troubleshooting the unit. 

LS Series accommodate from 25 to 50 MBTU/hr. LD Series from 40 to 50 MBTU/hr., Both feature 10' to 30' straight tube configurations, in natural or LP-Gas. Call for application and ordering information. 

DR Series 

Gas fired, high intensity, unvented/ infra-red heaters. The DR Series is commonly used in areas with high air infiltration, high ceilings, and/or spot heating applications.  These heaters are very economical heaters. The DR Series is available in a multitude of configurations, ranging from 30 to 160 MBTU/hr. with nine different control options.  Call for application and ordering information. 

Master Catalog>>Section J - Heaters>>Page J-8