Master Catalog>>Section F - Pipe & Fittings>>Page F-4


Continental Industries Con-Stab Stab-Type Fittings 

Click  to See Con-stab Installation Video (5MB) (External Link)

TEECO Products carries Continental Industries’ Con-Stab Fittings, superior stab-type fittings that meet our high standards for safety and quality. The Con-Stab fitting features a double internal (ID) seal that enables each fitting to seal perfectly –even on scratched pipe– by using the smooth internal surface of the pipe. Because the seals are located directly below the gripper, as load increases, sealing capacity increases. This improved seal protection creates the ultimate design for "stab-type" mechanical couplings. 

Con-Stab Fittings are available in a full range of coupling and fitting sizes: 1/2” CTS through 1” CTS and 1/2” IPS through 2” IPS. On 1¼” CTS and smaller sizes, a disposable chamfer tool is included in the bag with the fitting. 

The Con-Stab I.D. Seal fitting Advantages: 

- Cost effective joining method. 

- Simple assembly, disposable chamfer tool included. 

- No additional assembly equipment required for installation (Just chamfer pipe and push). 

- Expanded product line with various configurations and material options (PE 2406 or PE 3408). 

- Uni-body design eliminating all external parts. 

- Meets or exceeds all D.O.T. and ASTM requirements. 

- Listed with IAPMO/UPC. 


Couplings 

Part no. 

Description 

Order

52-1004 

Coupling - 1/2” CTS 

52-1012 

Coupling - 1/2” IPS 

52-1013 

Coupling - 3/4” IPS 

52-1014 

Coupling - 1” IPS 

52-1015 

Coupling - 1¼” IPS 

52-1016 

Coupling - 11/2” IPS 

52-1017 

Coupling -  2” IPS 


Repair Couplings 

Part no. 

Description 

Order

0459-56-1200 

1/2” CTS 12” Long 

1359-56-1200 

3/4” IPS 12” Long 

1459-56-1200 

1” IPS 12” Long 

3238-14-4415 

1¼” IPS 14” Long 

3238-14-4417 

2” IPS 14” Long 


The Scope Expandable Repair Couplings

The safe solution for quicker  and easier repairs and main extensions. Meets or exceeds ASTM and DOT requirements.

PE Size

Wall

Length

Part Number

Actual Repair Length

Order

 

3/4" CTS (7/8" OD)

.090

26"

3338-26-4606-00

25 1/2" - 26"

1" CTS (1 1/8" OD)

.099/.101

26"

3338-26-4608-00

25 1/2" - 26"

.090

26"

3338-26-4608-AA

25 1/2" - 26"

1/2" IPS

SDR-9.3 (.090)

26"

3338-26-4612-00

25 1/2" - 26"

3/4" IPS

SDR-11 (.095)

26"

3338-26-4613-00

25 1/2" - 26"

1" IPS

SDR-11 (.119)

26"

3338-26-4614-00

25 1/2" - 26"

1 1/4" IPS

SDR-10 (.166)

26"

3338-26-4615-00

25 1/2" - 26"

38"

3338-38-4615-00

37 1/2" - 38"

50"

3338-50-4615-00

49 1/2" - 50"

SDR-11 (.151)

26"

3338-26-4615-AA

25 1/2" - 26"

38"

3338-38-4615-AA

37 1/2" - 38"

50"

3338-50-4615-AA

49 1/2" - 50"

1 1/2" IPS

SDR-11 (.173)

26"

3338-26-4616-00

25 1/2" - 26"

38"

3338-38-4616-00

37 1/2" - 38"

50"

3338-50-4616-00

49 1/2" - 50"

2" IPS

SDR-11 (.216)

26"

3338-26-4617-00

25 1/2" - 26"

38"

3338-38-4617-00

37 1/2" - 38"

50"

3338-50-4617-00

49 1/2" - 50"


90° Elbows 

Part no. 

Description 

Order

51-1004 

90° Elbow 1/2” CTS 

51-1012 

90° Elbow 1/2” IPS 

51-1013 

90° Elbow 3/4” IPS 

51-1014 

90° Elbow 1” IPS 

51-1015 

90° Elbow 1¼” IPS 

51-1016 

90° Elbow 11/2” IPS 

51-1017 

90° Elbow 2” IPS 


Cap-N-Go's 

Part no. 

Description 

Order

57-1004 

Cap-N-Go 1/2” CTS 

57-1013 

Cap-N-Go 3/4” IPS 

57-1015 

Cap-N-Go 1¼” IPS 

57-1017 

Cap-N-Go 2” IPS 


End Caps 

Part no. 

Description 

Order

53-1004 

End Cap - 1/2” CTS 

53-1013 

End Cap - 3/4” IPS 

53-1014 

End Cap - 1” IPS 

53-1015 

End Cap - 1¼” IPS 

53-1017 

End Cap - 2” IPS 


Three-Way Tees 

Part no. 

Description 

Order

50-1004 

3-Way Tee 1/2” CTS 

50-1012 

3-Way Tee 1/2” IPS 

50-1013 

3-Way Tee 3/4” IPS 

50-1014 

3-Way Tee 1” IPS 

50-1015 

3-Way Tee 1¼” IPS 

50-1016 

3-Way Tee  11/2” IPS 

50-1017 

3-Way Tee 2” IPS 

Master Catalog>>Section F - Pipe & Fittings>>Page F-4

Home Online Ordering Products Locations History Literature Contact Us