|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Section F - Pipe & Fittings>>Page F-4
|
|
|
|
Continental Industries Con-Stab Stab-Type Fittings
|
Click to See Con-stab Installation Video (5MB) (External Link) |
TEECO Products carries Continental Industries Con-Stab Fittings, superior stab-type fittings that meet our high standards for safety and quality. The Con-Stab fitting features a double internal (ID) seal that enables each fitting to seal perfectly even on scratched pipe by using the smooth internal surface of the pipe. Because the seals are located directly below the gripper, as load increases, sealing capacity increases. This improved seal protection creates the ultimate design for "stab-type" mechanical couplings.
Con-Stab Fittings are available in a full range of coupling and fitting sizes: 1/2 CTS through 1 CTS and 1/2 IPS through 2 IPS. On 1Ό CTS and smaller sizes, a disposable chamfer tool is included in the bag with the fitting.
The Con-Stab I.D. Seal fitting Advantages:
- Cost effective joining method.
- Simple assembly, disposable chamfer tool included.
- No additional assembly equipment required for installation (Just chamfer pipe and push).
- Expanded product line with various configurations and material options (PE 2406 or PE 3408).
- Uni-body design eliminating all external parts.
- Meets or exceeds all D.O.T. and ASTM requirements.
- Listed with IAPMO/UPC.
Click image above to enlarge application guide
Couplings
|
Part no. |
Description |
|
|
52-1004 |
Coupling - 1/2 CTS |
|
|
52-1012 |
Coupling - 1/2 IPS |
|
|
52-1013 |
Coupling - 3/4 IPS |
|
|
52-1014 |
Coupling - 1 IPS |
|
|
52-1015 |
Coupling - 1Ό IPS |
|
|
52-1016 |
Coupling - 11/2 IPS |
|
|
52-1017 |
Coupling - 2 IPS |
Repair Couplings
|
Part no. |
Description |
|
|
0459-56-1200 |
1/2 CTS 12 Long |
|
|
1359-56-1200 |
3/4 IPS 12 Long |
|
|
1459-56-1200 |
1 IPS 12 Long |
|
|
3238-14-4415 |
1Ό IPS 14 Long |
|
|
3238-14-4417 |
2 IPS 14 Long |
90° Elbows
|
Part no. |
Description |
|
|
51-1004 |
90° Elbow 1/2 CTS |
|
|
51-1012 |
90° Elbow 1/2 IPS |
|
|
51-1013 |
90° Elbow 3/4 IPS |
|
|
51-1014 |
90° Elbow 1 IPS |
|
|
51-1015 |
90° Elbow 1Ό IPS |
|
|
51-1016 |
90° Elbow 11/2 IPS |
|
|
51-1017 |
90° Elbow 2 IPS |
Cap-N-Go's
|
Part no. |
Description |
Order |
|
57-1004 |
Cap-N-Go 1/2 CTS |
|
|
57-1013 |
Cap-N-Go 3/4 IPS |
|
|
57-1015 |
Cap-N-Go 1Ό IPS |
|
|
57-1017 |
Cap-N-Go 2 IPS |
End Caps
|
Part no. |
Description |
|
|
53-1004 |
End Cap - 1/2 CTS |
|
|
53-1013 |
End Cap - 3/4 IPS |
|
|
53-1014 |
End Cap - 1 IPS |
|
|
53-1015 |
End Cap - 1Ό IPS |
|
|
53-1017 |
End Cap - 2 IPS |
Three-Way Tees
|
Part no. |
Description |
|
|
50-1004 |
3-Way Tee 1/2 CTS |
|
|
50-1012 |
3-Way Tee 1/2 IPS |
|
|
50-1013 |
3-Way Tee 3/4 IPS |
|
|
50-1014 |
3-Way Tee 1 IPS |
|
|
50-1015 |
3-Way Tee 1Ό IPS |
|
|
50-1016 |
3-Way Tee 11/2 IPS |
|
|
50-1017 |
3-Way Tee 2 IPS |
Master Catalog>>Section F - Pipe & Fittings>>Page F-4
|
|
|
|
