|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Section C - Meters & Scales>>Page C-4
|
|
|
|
1" Tuthill FPP Meters LP-Gas Meter
Tuthill-FPP Meters feature oval gear technology. With only two moving parts and no metal-to-metal contact, they are very quiet and extremely reliable. Tuthill meters come equipped with a digital display.
|
Part no. |
Description |
Capacity |
|
|
TS06-TEECO |
Tuthill meter with backlit Electronic Large Numerical Counter (ELNC) |
3-18 GPM |
Tuthill FPP Meters Electronic Large Numerical Counter Register (ELNC)
Tuthill's ELNC register directly replaces Neptune’s Mechanical Reset Registers. Accepts the mechanical drive from the Neptune / Actaris Meter and converts it to a large number electronic display. The ELNC register is easy to install and simple to calibrate. The ELNC register features a dust and waterproof NEMA 4 enclosure, a six Digit reset counter with full 1” numbers, and an eight-digit no-reset totalizer with 3/8” numbers. Power is provided by self-contained long-life lithium batteries. Shock-resistant electronics. Exclusive memory saver circuit. Field programmable calibration. Internal heater option for use down to -40 degrees F. No reset register Damage - No damage to register if operator tries to reset register when fluid is flowing. Low cost of ownership- No mechanical register maintenance, lower energy use because of reduced torque requirement.
|
Part no. |
Description |
|
|
ELNC-1601 |
Electronic Large Number Counter for Neptune 600 series register, with battery pack. |
|
|
ELN-S |
Extension shaft for long-shaft 600 register |
Full Circle Quick-Vent Meter Bleed Flange
Quick-Vent replaces the blind strainer screen flange to allow for safe and easy meter evacuation when servicing the strainer screen in the meter. Quick-Vent allows the operator of a bobtail or a technician to effectively and safely evacuate gases from upstream of the meter differential valve without loosening or removing component bolts. Available as the MA98SLT with thermo-well, RTD port, and auxiliary port for 2-inch meters and as the MA20SLT for 3/4 and 1 inch meters. Quick-Vent incorporates a unique metering valve which allows for controllable bleed rates. No more loosening flange cap screws or fittings with sudden, uncontrollable discharge. All stainless steel construction. Allows evacuated product to be routed to a remote location or to a tank. UL recognized component for LP Gas service.
|
Part no. |
Description |
|
|
MA98SLT |
2" Meter bleed flange |
|
|
MA20SLT |
3/4" and 1" Meter bleed flange |
Master Catalog>>Section C - Meters & Scales>>Page C-4
|
|
|
|