Corken Coro-Vane Z4500 Stationary Pump, Coro-Vane Stationary Pumps

Master Catalog>>Section B - Pumps & Compressors>>Page B-3

Corken Coro-Vane Z4500 Stationary Pump
The Z4500 is a four-inch stationary pump designed for transport loading and multiple bobtail loading applications. If you have two or more bulkheads to load bobtails and transports and would like to shorten your fill times, then the Z4500 is the stationary pump for you. The Z4500 can fill two 3,000 gallon bobtails in 20 minutes or less at typical operating RPMs.

Part no.	Description	Order
Z4500	4-Inch Stationary pump, 197 GPM @ 420 RPM - 382 GPM @ 780 RPM, 4" 300# ANSI inlet	Order

Z4500

Corken Coro-Vane Z3500 Stationary Pump - NEW!

The Z3500 is a three-inch pump designed for stationary and foot mounted truck applications.

Features and Benefits
• Large diameter non-metallic pins allow this pump to be operated at a higher RPM without damage.
• High tech materials used on the cam and blades help extend the life of the pump.
• Up to 7% or more capacity at 640 RPM.
• Unlike other three inch stationary pumps rated at 640 RPM, the Z3500 is rated up to 800 RPM providing higher capacity without damage.
• Maintenance is made simple. When it’s necessary to service the pump, simply remove twelve head bolts to inspect the bearings, seals, side plates, rotor, vanes and vane drivers.
• Retrofits the Corken model 1021 stationary pump and other three-inch competitive pumps with little or no change in piping.

Part no.	Description	Order
Z3500	3-Inch Stationary pump	Order

Corken Coro-Vane Pumps - Stationary

Corken Coro-Vane® pumps are positive displacement pumps. They produce a maximum differential pressure of 125 psig (8.6 bar g). Corken manufactures four sizes of Coro-Vane pumps, ranging from 1gpm to 350 gpm (0.2–79.5 m³/hr). Corken offers these pumps with v-belt or direct-drive mounting options.

Typical applications for the Coro-Vane® pump include cylinder filling, loading and unloading of bulk trucks and transport trailers.

The pump housing and rotors are constructed of ductile iron for extra strength and long life. The sliding vanes are self-adjusting which allows for longer life and higher efficiencies throughout the life of the pump. The pump design includes removable pump casing cams (liners) which when worn can be replaced in minutes. The seal and bearings can be replaced in minutes by simply removing four bolts. Some of the models are equipped with an internal relief valve.

Corken offers the option of belt drive or gear drive with reducer. The Coro-Vane® stationary pumps are designed to run up to 950 RPM. The C51/F51 bottle filling Coro-Vane pumps are designed to run at 1800 RPM.

Part no.	Description	Inlet	Outlet	Voltage	Order
C51A	3-5 GPM, pump w/motor	1" NPT	3/4" NPT	115/230 1Ø
F51	3-5 GPM, pump w/mounting feet, no motor	1" NPT	3/4" NPT	n/a
F51-101	3-5 GPM, Pump w/mounting base, no motor	1" NPT	3/4" NPT	n/a

Part no.	Description	Inlet	Outlet	Order
521-103 W/10HP	90 GPM, pump w/ 10hp, 60hz, 3-phase explosion proof motor	2½" NPT	2" NPT
521-103	90 GPM, pump w/base for V-belt drive	2½" NPT	2" NPT
521	90 GPM, bare pump only	2½" NPT	2" NPT
1021-103 W/10HP	200 GPM, pump, w/ 10hp, 60hz, 3-phase explosion proof motor	3" NPT	3" NPT
1021-103 W/15HP	200 GPM, pump, w/ 10hp, 60hz, 3-phase explosion proof motor	3" NPT	3" NPT
1021-103	200 GPM, pump, w/base for V-belt drive	3" NPT	3" NPT
1021	200 GPM, bare pump only	3" NPT	3" NPT
F1021-103	200 GPM, pump, flanged w/base for V-belt drive	3" NPT	2-1/2" NPT
F1521-103	350 GPM, pump, flanged w/base for V-belt drive	4" NPT	3" NPT

Coro-Vane Pump with V-Belt Drive and Motor

For Coro-Vane Parts, See Next Page

Master Catalog>>Section B - Pumps & Compressors>>Page B-3