|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Section B - Pumps & Compressors>>Page B-2
|
|
|
|
Corken Coro-Flo Pumps - F Series - V-Belt/Direct Drive
For low capacity, high-head pumping. The F-Model pump is a base plate mounted version. Coro-Flo® pumps are design to operate at shaft speeds between 2880—3600 rpm. The F-Model provides the flexibility of motor selection. Order motor separately.
|
Part no. |
Description* |
Inlet |
Outlet |
|
|
F9 |
7 GPM, bare pump only |
1¼" NPT |
1" NPT |
|
|
F9-101 |
7 GPM, Pump w/frame for direct drive |
1¼" NPT |
1" NPT |
|
|
F9-103 |
7 GPM, pump w/frame for V-belt drive |
1¼" NPT |
1" NPT |
|
|
F10 |
9 GPM, bare pump only |
1¼" NPT |
1" NPT |
|
|
F10-101 |
9 GPM, Pump w/frame for direct drive |
1¼" NPT |
1" NPT |
|
|
F10-103 |
9 GPM, pump w/frame for V-belt drive |
1¼" NPT |
1" NPT |
|
|
F12 |
15 GPM, bare pump only |
1½" NPT |
1" NPT |
|
|
F12-101 |
15 GPM, Pump w/frame for direct drive |
1½" NPT |
1" NPT |
|
|
F12-103 |
15 GPM, pump w/frame for V-belt drive |
1½" NPT |
1" NPT |
|
|
F13 |
20 GPM, bare pump only |
1½" NPT |
1" NPT |
|
|
F13-101 |
20 GPM, Pump w/frame for direct drive |
1½" NPT |
1" NPT |
|
|
F13-103 |
20 GPM, pump w/frame for V-belt drive |
1½" NPT |
1" NPT |
|
|
F14 |
32 GPM, bare pump only |
1½" NPT |
1" NPT |
|
|
F14-101 |
32 GPM, Pump w/frame for direct drive |
1½" NPT |
1" NPT |
|
|
F14-103 |
32 GPM, pump w/frame for V-belt drive |
1½" NPT |
1" NPT |
|
|
*Flow rates will vary depending on operating conditions, electrical service & differential pressure |
||||
Corken DS/DL Series - Direct Mount
Direct mounted frame for direct coupling. The DS/DL Model pumps are designed to eliminate the need for a baseplate, coupling guard, and coupling alignment which makes the DS/DL series pumps compact and easy to install. The special bracket supports both the pump and the motor so they can be directly coupled. Order motor separately.
|
Part Number |
Description* |
Inlet |
Outlet |
|
|
DS9 |
7 GPM, small frame |
1¼" NPT |
1" NPT |
|
|
DL9 |
7 GPM, large frame |
1¼" NPT |
1" NPT |
|
|
DS10 |
9 GPM, small frame |
1¼" NPT |
1" NPT |
|
|
DL10 |
9 GPM, large frame |
1¼" NPT |
1" NPT |
|
|
DS12 |
15 GPM, small frame |
1½" NPT |
1" NPT |
|
|
DL12 |
15 GPM, large frame |
1½" NPT |
1" NPT |
|
|
DS13 |
20 GPM, small frame |
1½" NPT |
1" NPT |
|
|
DL13 |
20 GPM, large frame |
1½" NPT |
1" NPT |
|
|
DS14 |
32 GPM, small frame |
1½" NPT |
1" NPT |
|
|
DL14 |
32 GPM, large frame |
1½" NPT |
1" NPT |
|
|
*Flow rates will vary depending on operating conditions, electrical service & differential pressure. |
||||
Corken Coro-Flo Pumps - 150 Series - AutoGas Pump
Designed for high-pressure propane motor fueling. Three mounting options available: Direct drive with coupling, belt drive and direct-mounted with C-face motor. Order motor separately.
|
Part no. |
Description |
Inlet |
Outlet |
|
|
FF150 |
Autogas Series Pump 33.8 GPM @ 3,450 RPM @ 60 Hz. |