|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Section B - Pumps & Compressors>>Page B-14
|
|
|
|
Smith Truck Pumps- Foot Mount
TC-1044H
Model TC-1044H is designed especially for small delivery trucks that fill cylinders, trailer bottles, and sometimes larger consumer tanks. Single mechanical shaft seal for maximum safety and ease of maintenance.
TC-2
Model TC-2 is similar to the TC-1044H but has greater capacity at higher differential pressures. Single mechanical shaft seal assembly. Five-piece gear arrangement for maximum efficiency at high differential pressures. A flange option is available utilizing steel threaded weld-type flange, 2".
TC-3
Model TC-3 is for maximum capacity high flow delivery trucks with 2" meters. Same basic design as the TC-2 model but with an additional secondary housing. Five-piece gear design. A flange option is also available incorporating steel threaded or weld-type flanges, 2".
|
Model |
Average Delivery Rate |
Max. Differential Pressure |
Inlet/ |
Pump |
Pump Rotation |
|
|
40 psid |
75 psid |
|||||
|
TC-1044H |
30 GPM @ 900 RPM |
25 GPM @ 900 RPM |
125 psi |
1½" FNPT |
50 lbs. |
Reversible |
|
TC-2 |
42 GPM @ 500 RPM |
35 GPM @ 500 RPM |
125 psi |
2½" FNPT |
100 lbs |
Reversible |
|
TC-3 |
86 GPM @ 500 RPM |
70 GPM @ 500 RPM |
125 psi |
2½" FNPT |
135 lbs. |
Reversible |
|
Part no. |
Description |
|
|
TC-1044H |
Pump only |
|
|
TC-2 |
Pump only |
|
|
TC-3 |
Pump only |
|
|
MC-101 |
Shaft seal assembly for TC-1044H |
|
|
MC-102 |
Shaft seal assemblies for TC-2. |
|
|
MC-103 |
Shaft seal assemblies for TC-3. |
Smith Truck Pumps- Flange Mount
MCAT Series 3" flange mount truck pumps are designed for 1200 RPM maximum shaft speed and deliver comparably to other makes at 650 RPM PTO speed. Damage associated with over-revving is eliminated. Allows for faster fuel deliveries where large meters are used.
MCAT Series pumps incorporate the heavy duty NSSA option as standard equipment. Aircraft quality steel gear sets and Tungsten Carbide idler gear shafts allow for maximum efficiency at higher differential pressures. All MCAT-series pumps feature balanced internal porting that greatly enhances pump life.
MCAT Series pumps use a SINGLE mechanical shaft seal. The patented SUPERSEAL mechanical shaft seal assembly that does not have to be removed from the pump in the event the gear set needs to be replaced; no loose seal components to worry about. MCAT Series pumps are designed for minimal over pressure should the internal bypass relief valve ever open. Bypass valve porting is oversized to minimize damage due to cavitation. Internal relief valve is set at 150 psid and as such, an external bypass valve is required by the Underwriters Laboratories.
All MCAT-series pumps are provided with two 90° threaded elbows for the discharge and auxiliary inlet. Optional flanges includes a blind flange for the auxiliary inlet, threaded or weld type flanges, 2" NPT, for the discharge or auxiliary inlet.
|
Model |
Average Delivery Rate |
Max. Differential Pressure |
Outlet Size |
Pump |
|
|
40 psid |
75 psid |
||||
|
MCAT-2R, 2L |
39 GPM @ 700 RPM |
35 GPM @ 700 RPM |
125 psi |
2" FNPT threaded, 90° elbow |
108 lbs. |
|
MCAT-3R, 3L |
78 GPM @ 700 RPM |
70 GPM @ 700 RPM |
125 psi |
2" FNPT threaded, 90° elbow |
137 lbs. |
|
Part no. |
Description |
|
|
MCAT-2R |
Pump only, right rotation |
|
|
MCAT-2L |
Pump only, left rotation |
|
|
MCAT-3R |
Pump only, right rotation |
|
|
MCAT-3L |
Pump only, left rotation |
Master Catalog>>Section B - Pumps & Compressors>>Page B-14
|
|
|
|