|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Section B - Pumps & Compressors>>Page B-13
|
|
|
|
Smith MC-1044, MC-2 Series - Medium Capacity Stationary for Small Bulk Plant Installations
MC-1044, MC-1044H
The MC-1044 pump incorporates the balanced 3-gear design to maximize efficiency and minimize slippage. It is reversible with proper consideration of inlet and outlet ports. The MC-1044 can fill up to three 100 lb. cylinders in 4 minutes using a manifold arrangement. No periodic maintenance or lubrication is required. Since the pump loading is balanced and no heavy rotor is utilized, the mechanical shaft seal ball bearing sees minimal work. It is sealed for life and does not require periodic greasing.
MC-2
The MC-2 pump has 2-1/2" NPT tapped inlet ports and is reversible. Suitable for loading delivery trucks at a rate of 45-50 GPM. Fills up to five 100 lb. cylinders on a manifold in 4 minutes. Can be fitted with steel flanges, 2" threaded or weld type.
|
Model |
Average Delivery Rate, 3600 RPM |
Max. Differential Pressure |
Inlet/Outlet Size |
Motor |
Pump Rotation |
|
|
40 psid |
75 psid |
|||||
|
MC-1044 |
17 GPM |
14 GPM |
125 psi |
1½" FNPT |
1½ HP to 40 psid, 2 HP over 75 psid |
Reversible |
|
MC-1044H |
30 GPM |
25 GPM |
125 psi |
1½" FNPT |
1½ HP to 40 psid, 2 HP over 75 psid |
Reversible |
|
MC-2 |
42 GPM |
8 GPM |
125 psi |
2½" FNPT |
3 HP to 40 psid, 5 HP over 75 psid |
Reversible |
|
Part no. |
Description |
|
|
MC-1044 |
Pump only |
|
|
MC-1044H |
Pump only |
|
|
MC-101 |
Shaft seal assembly for MC-1044, MC-1044H, TC-1044H |
|
|
MC-2 |
Pump only |
|
|
MC-102 |
Shaft seal assembly for MC-2 |
* Call TEECO for information on pump/motor packages.
MC-3, MC-4, MC-5 Series - Large Capacity, Heavy Duty Stationary
MC-3, MC-3H
Smith's most popular bulk transfer pump. Utilizes the balanced 3-gear design. Is recommended as a heavy duty bulk plant pump with a capacity up to 100 GPM. Inlet and outlet ports are conveniently located on the sides of the pump to minimize restrictions caused by fittings such as elbows. MC-3H model delivers the same capacity as the MC-3 but at 1500 RPM. Both models available with flanges, either threaded or weld type. Reversible.
MC-4, MC-4H
The same basic pump as the MC-3, MC-3H models but with an extra secondary housing to boost capacity. Comes standard with a 4" NPT tapped inlet and 2.5" NPT tapped outlet. Available with flanges, either threaded or weld type. MC-4H model delivers the same capacity as the MC-4 but at 1500 RPM. Not reversible.
MC-5, MC-5H
This is the highest capacity Smith pump in regular production. Utilizes 3 secondary housings to boost capacity to 200 GPM. Optional large capacity gear set is available to increase rated capacity to 250 GPM. Comes standard with 4" NPT tapped inlet and 2.5" NPT tapped outlet. Available with same flange arrangement as MC-4, MC-4H models. MC-5H model delivers the same capacity as the MC-5 but at 1500 RPM. Not reversible.
| Model |
Average Delivery Rate, 1800 RPM |
Max. Differential Pressure | Inlet/ Outlet Size | Motor | Pump Rotation | |
| 40 psid | 75 psid | |||||
| MC-3 | 125 psi | 2 1/2" FNPT | 5 HP TO 40 PSID, 7 1/2 HP OVER 75 PSID | Reversible | ||
| 84 GPM | 70 GPM | |||||
| MC-4 | 125 GPM | 105 GPM | 125 psi | 4" FNPT inlet, 2 1/2" FNTP Outlet | 7 1/2 HP TO 40 PSID, 10 HP OVER 75 PSID | CCW |
| MC-5 | 167 GPM | 142 GPM | 125 psi | 4" FNPT inlet, 2 1/2" FNTP Outlet | 10 HP TO 40 PSID, 15 HP OVER 75 PSID | CCW |
|
Part no. |
Description |
|
|
MC-3 |
Pump only* |
|
|
MC-103 |
Shaft seal assembly for MC-3 |
|
|
MC-4 |
Pump only* |
|
|
MC-104 |
Shaft seal assembly for MC-4 |
|
|
MC-5 |
Pump only* |
|
|
MC-105 |
Shaft seal assembly for MC-5 |
* Call TEECO for information on pump/motor packages.
Master Catalog>>Section B - Pumps & Compressors>>Page B-13
|
|
|
|