|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Master Catalog>>Section B - Pumps & Compressors>>Page B-11
|
|
|
|
Smith Pumps - E Series Small Capacity Stationary Pumps
Designed for direct motor mount to the 56C-frame electric motor or to internal combustion engine for portable transfer applications. Each E-series pump comes complete with an internal/external bypass valve and built-in strainer. Affords the flexibility of either using the pump bypass valve to relieve within the pump in cases where it is necessary or with a simple rotation of the pump cover, the internal bypass valve can be used as an external bypass valve with the use of a return line back to the supply tank. The bypass valve cartridge is set to crack at 90 psid. Replacement parts for E-series are interchangeable with D-series. Foot mount available. .
|
Part no. |
Description |
|
|
EG-1 |
Pump only |
|
|
EG1-M1-3B |
Pump w/1 HP motor, 115/208/230 V 1Ø (EM1-3B) |
|
|
EG1-M8B |
Pump w/ 3½ HP LPG engine (EM-8) |
|
|
ECH-1 |
Pump only |
|
|
ECH-M5B |
Pump w/1½ HP motor, 115/208/230 V 1Ø (EM-5B) |
|
|
ECH-M6B |
Pump w/1½ HP motor, 115/208/230 V 3Ø (EM-6B) |
|
|
ECH-M8B |
Pump w/ 3½ HP LPG engine (EM-8) |
|
|
E-100 |
Exchange, Shaft- Seal assembly for EG-1 |
|
|
E100-H |
Exchange, Shaft seal assembly for EC-H |
| Model | Motor Speed |
Average Delivery Rate, 3600 RPM |
Internal Bypass Relief Setting | Max. Differential Pressure | Inlet/Outlet Size | Motor | Pump Rotation | |
| 40 psid | 75 psid | |||||||
| EG-1 | 3600 RPM | 90 psi | 125 psi | 3/4" FNPT | 1 HP | CW | ||
| 8½ GPM | 7 GPM | |||||||
| ECH-1 | 3600 RPM | 13½ GPM | 12 GPM | 90 psi | 125 psi | 1" FNPT | 1½ HP | CW |
EG1-M1-3B EG-1
E-Series Parts Details
|
Ref. no |
Part no. |
Description |
Qty. |
|
|
1 |
12PLUG 34PLUG |
3/4" NPT square head steel pipe plug for EG-1* 3/4" NPT square head steel pipe plug for EC-H* |
1 1 |
|
|
2 |
E-2 |
Gear end cover |
1 |
|
|
3 |
3/8-16Tx1-1/2L |
Short Gr.5 cap screws for gear end cover |
8 |
|
|
4 |
3/8-16Tx3-1/2L |
Long Gr. 5 cap screws for mounting to spacers |
4 |
|
|
5 |
6230-28 |
O-ring for gear end cover |
1 |
|
|
6 |
EG-5 EC-5H |
Drive gear for EG-1 Drive gear for EC-H |
1 1 |
|
|
7 |
EG-6 EC-6H |
Idler gear with E-10 bushing for EG-1 Idler gear with E-10 bushing for EC-H |
1 1 |
|
|
8 |
E-21 |
Strainer screen |
1 |
|
|
9 |
568-118 |
Top O-ring |
1 |
|
|
10 |
6227-17 |
Bottom O-ring |
1 |
|
|
11 |
E-20ASSY |
Bypass valve cartridge- Includes O-rings |
1 |
|
|
12 |
E-1 E-1H |
Main housing for EG-1 Main housing for EC-H |
1 1 |
|
|
13 |
E-9 |
Idler gear shaft |
1 |
|
|
14 |
105CUP |
Leak detection port with bleeder cup |
1 |
|
|
15 |
E-100 E100-H |
Shaft- Seal assembly for EG-1 Shaft seal assembly for EC-H |
1 1 |
|
|
16 |
E-15 |
Bearing retainer plate |
1 |
|
|
17 |
10-32Tx1/2L |
Fillister head screws for bearing retainer plate |
8 |
|
|
18 |
VC-20 VC-30 |
