Products>>Section A- RegO / ECII>>Miscellaneous Equipment>>Pages A-54, A-55, A-56

Quick Connect POL filling Adapter

The 7193R-10 is designed for use in LP-Gas filling systems including fill rooms and dispensing stations. The quick acting lever allows fast connection to POL type (CGA 510) cylinder valves. It fits both compact and heavy duty cylinder valves commonly found on 5 to 100 lb. DOT LP-Gas cylinders.

Vent Valves

Especially designed to bleed off liquid or vapor pressures trapped in transfer lines. When installed in the downstream boss of RegO® globe and angle valves used at the end of a liquid transfer hose, the bleeder valve allows for the controlled venting of the product and indicates to the operator that the valves are closed and he can disconnect the coupling. They may also be used as a fixed liquid level gauge where the dip tube is part of the container.

Fixed Liquid Level gauges

Especially designed to provide a visible warning when containers are filled to the maximum permitted filling level. At the start of the filling operation, with the vent stem opened, the valve discharges vapor. When the maximum permitted filling level is reached, the valve discharges liquid. These valves are normally furnished with a 12", 3/16" O.D. dip tube and incorporate a No. 54 drill size orifice. An optional instruction plate with "Stop Filling When Liquid Appears’’ may be ordered for use with these valves. T-eco

* Dip tube must be ordered separately. Add to suffix. Example: 11" Dip Tube = 3165F11.0.

3165CF12.0

3165SF12.0

TA3169F12.0

Spanner Wrench for ACME Connectors

This aluminum spanner wrench is especially designed for use with 2 1/4" and 3 1/4" ACME couplings, adapters and caps.

Combination Valve for Bulk Storage Containers

Designed for installation on bulk storage containers, this valve combines a pressure gauge mounting and provision for a fixed tube liquid level gauge. The shut-off valve prevents the pressure gauge from being subjected to constant pressure, thereby prolonging its life and accuracy. The valve may be closed, and the vent valve opened to vent pressure from the gauge to permit replacement. For fixed liquid level gauging, the valve can be mounted at the maximum permitted filling level. When equipped with a dip tube threaded 1/8" M. NPT, it can be installed at any convenient level.

* Has 1/8" F. NPT opening for installing separate dip tube.

Gritrol Fuel Line Filters

Designed especially for use in liquid motor fuel lines to trap foreign material which otherwise may damage precision components in the LP-Gas carburetion system. These filters incorporate an integral sintered metal filter element in a straight through design.

Pressure Gauges

Especially designed in a variety of sizes and construction for the LP-Gas and anhydrous ammonia industry. All RegO® pressure gauges have a 1/4" M. NPT connection unless otherwise noted.

Needle Valves

These valves are high quality, "true’’ throttling valves. Unlike most socalled needle valves, both the body seat and stem are tapered to provide fine, precise control over a wide range of adjustment without stem galling. The 1224 may be used as a small, inexpensive shut-off valve between a pressure gauge and bulk storage container to allow for convenient gauge replacement. The 1314, 1316 and 1318 provide taper pipe thread by left hand hose connection threads and are useful in a wide range of torch and fuel burner applications where an accurate throttling action is required.

Household Gas Detector Alarm

The 100-HGD gas fume detection/alarm unit gives advance warning of gas leaks well below the hazard level (1/4th the lowest explosive level). It provides the homeowner more time to take action to protect the family and remedy the problem.

Products>>Section A- RegO / ECII>>Miscellaneous Equipment>>Pages A-54, A-55, A-56