|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Products>>Section A- RegO / ECII>>Miscellaneous Equipment - Hose-End Cylinder Filling Adapters>>Page A-53
|
|
|
|
Hose End Adapters for DOT Cylinder Filling
Designed to provide quick and easy filling of DOT cylinders with POL or Type I connections. This adapter may be used with hydraulic and electric automatic systems or with manual systems in conjunction with a RegOŽ 7901TB Quick Acting Shut-Off Valve. These filling connectors have an extended connection on the handwheel, which makes it possible to connect the loading hose to valves on cylinders with fixed collars. The handwheel is well outside the collar for easy operation.
| Part Number | Application | Inlet Connection | Outlet Connection | Materials | Order |
| 7193D-10 | Filling of DOT Cylinders with POL Connections | 1/4 M. NPT | M. POL (CGA 510) | Brass and Stainless Steel | |
| 7193U-10 | Filling of DOT Cylinders with Type 1 Connections | Type 1 Connection (1 5/16" M. ACME) | Brass |
|
7193D-10 |
7193U-10 |
Connector for DOT Cylinder Filling Adapter
The 7193T-10 is designed for use on the 7193D-10 Filling Adapters. Connector allows adapter to be used on the 1 5/16 M. ACME & F. POL connections of Type 1 valves.
| Part Number | Application | Inlet Connection | Outlet Connection | Materials | Order |
| 7193T-10 | Converts 7193D-10 Adapter from POL to Type 1 Connection | M. POL (CGA 510) | Type 1 Connection (1 5/16" M. ACME) | Brass |
Hose End Adapter for Lift Truck Cylinder Filling
The 7193L-10A is designed to provide quick and easy attachment of the filling hose to DOT cylinders equipped with RegOŽ 7141M check connectors.
| Part Number | Application | Inlet Connection | Outlet Connection | Materials | Accessories | Order |
| Adapter | ||||||
| 7193L-10A | Filling of Fork Lift Cylinders* | 1/4" M. NPT | 1 1/4" F. ACME | Brass | 5760A |
* The 7193L-10A is intended to be permanently attached to the filling hose. A 5760A adapter enables the 7193L-10A to be attached to the POL connection on the 7193D-10 at regulator cylinder filling stations to allow for occasional filling of fork lift cylinders.
Lever Operated Hose End Adapter for Fork Lift Cylinder Filling
Designed to drastically reduce labor and time when continuously filling large numbers of lift truck cylinders equipped with RegOŽ 7141M check connectors.
| Part Number | Application | Inlet Connection | Outlet Connection | Materials | Order |
| 7193K-10B | Lever Operated for Quick Filling of Fork Lift Cylinders | 1/4" F. NPT | Quick Disconnect Yoke* | Brass and Steel |
* For use with RegOŽ 7141M check connector.
Products>>Section A- RegO / ECII>>Miscellaneous Equipment - Hose-End Cylinder Filling Adapters>>Page A-53
|
|
|
|
