|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Products>>Section A- RegO / ECII>>Globe and Angle Valves>>Page A-25
|
|
|
|
|
|
Quick Acting Minimum Loss Hose End Valves for Bobtail Delivery Trucks and Dispensing Stations
Designed to vastly reduce the amount of product vented when disconnecting bobtail delivery trucks, dispensing systems and anhydrous ammonia nurse tanks. These valves provide instant, full-on flow at the flip of a handle. Shut-off is instant and the handle locks for added protection. This "top of the line" hose-end valve is a fully contained unit that does not require additional filling adapters or connectors.
| Part Number | Inlet Connection (F. NPT) | Outlet Connection (F. ACME) | Locking Handle | Flow at 1 PSIG (Cv) Pressure Drop* (GPM/Propane) | |
| A7793A | 3/4" | 1 3/4" | Yes | 16.0 | |
| A7797A | 1" | 1 3/4" | 16.0 |
* To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in table by square
root of pressure drop. Example: A7797 @ 9 PSIG = 16.0 x square root of 9 = 48.0 GPM/propane. For NH3 flow, multiply propane flow by .90.
Quick Acting Hose End Valves for Bobtail Delivery Trucks and Dispensing Stations
Designed especially for safe operator handling of LP-Gas in bobtail delivery truck, dispensing systems and anhydrous ammonia nurse tank service. These valves provide instant, full-on flow at the flip of the handle and provide instant positive shut-off with a handle lock for added protection.
| Part Number | Body Design | Inlet & Outlet Connection (F. NPT) | Locking Handle | Flow at 1 PSIG (Cv) Pressure Drop* (GPM/Propane) | Accessories | |||
| Filling Connectors** | ||||||||
| Extended | Compact | |||||||
| Steel | Brass | Steel | ||||||
| A7707L | Globe | 1" | Yes | 18.0 | A7575L4 | 3175A | A3175A | |
| A7708L | Angle | 22.0 | ||||||
A7707L |
A7708L |
|||||||
* To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in table by square root of pressure drop.
Example: A7708L @ 9 PSIG = 22.0 x square root of 9 = 66.0 GPM/propane. For NH3 flow, multiply propane flow by .90.* * See appropriate catalog section for additional information.
Flange Seal Globe and Angle valves for Bulk Storage Containers, Filling Hoses and Plant Piping
Designed to assure positive shut-off and long maintenance-free service life in liquid or vapor service. Ideally suited for use on cylinder charging manifolds, truck filling hoses, bulk storage containers and plant piping. The high quality construction and wide variety of sizes make them highly suited for use with LP-Gas, anhydrous ammonia and in the chemical and petrochemical industries.
| Part Number | Inlet and Outlet Connection (F. NPT) | Flow at 1 PSIG (Cv) Pressure Drop (GPM/Propane)* | Accessories | Order | |||
| Globe | Angle | Globe | Angle | Hydrostatic Relief Valve | Vent Valve | ||
| 7704P | 7704LP | 1/2" | 7.3 | 12.3 | SS8001J or SS8001L | TSS3169 | |
| A7704P | A7704LP | ||||||
| 7705P | 7706P | 3/4" | 11.5 | 17.7 | |||
| A7705P | A7706P | ||||||
A7704P |
A7706P |
* To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in table by square
root of pressure drop. Example: A7704LP @ 9 PSIG =12.3 x square root of 9 = 36.9 GPM/propane. For NH3 flow, multiply propane flow by .90.Products>>Section A- RegO / ECII>>Globe and Angle Valves>>Page A-25
|
|
|
|