Home  |  Online Ordering  |  Products  |  Engineering & Construction  |  LPG Trucks & Fabrication  |  TEECO Topics  |  Contact TEECO  |  About TEECO  

Products>>Section A- RegO / ECII>>Globe and Angle Valves>>Page A-24

                                                                                                                                                  



Globe and Angle Valves - General Information

V- Ring Seal Globe and Angle Valves General Information & Features (PDF) 271 Kb.

LP-Gas Hose End Filling Valves ( with ACME Connectors) Safety Warnings (PDF) 236 Kb.

Flange Seal Globe And Angle Valves - General Information & Features  (PDF) 236 Kb.


V-Ring Seal Globe Valves and Angle Valves for Bulk Storage Containers, Transports, Bobtails and Plant Piping

Specifically designed to assure positive shut-off and long, maintenancefree service life in liquid or vapor service on bulk storage containers, transports, bobtails, cylinder filling plants and plant piping. The high quality construction and wide variety of sizes make them highly suited for use with LP-Gas, anhydrous ammonia and in the chemical and petrochemical industries.

Part Number Inlet and Outlet Connection Port Diameter Flow at 1 PSIG Pressure Drop (Cv) (GPM/Propane)*** Accessories Order valves
Buna N Seat Discs Teflon Seat Discs* Hydrostatic Relief Valve Vent Valve
Globe Angle Globe Angle Globe Angle
--- --- TA7034P TA7034LP 1/2" F. NPT 3/4" 10.0 14.8 SS8001U TSS3169
A7505AP A7506AP TA7505AP TA7506AP 3/4" F. NPT 12.0 17.7
A7507AP A7508AP TA7507AP --- 1" F. NPT 1" 17.8 22.0
A7509BP A7510BP TA7509BP TA7510BP 1 1/4" F. NPT 1 1/4" 36.5 54.0
A7511AP A7512AP TA7511AP TA7512AP 1 1/2" F. NPT 1 1/2" 43.0 55.5
A7511FP --- --- --- 1 1/2"  Flange** 46.0 ---
A7513AP A7514AP TA7513AP 2" F. NPT 2" 75.0 88.5
A7513FP A7514FP TA7513FP 2" Flange** 78.0 133.0
A7517AP A7518AP TA7517AP TA7518AP 3" F. NPT 3 1/8" 197.0 303.0
A7517FP A7518FP TA7517FP --- 3" Flange**

TA7034

A7505AP

A7513AP

A7517FP

A7514AP

A7517AP

A7518FP

* Teflon seat discs on valves built to order.

* * 300# ANSI R.F. Flange.

* * * To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in chart by square root of pressure drop.

Example: 7514FP @ 9 PSIG = 133 x square root of 9 = 399 GPM/propane. For NH3 flow, multiply propane flow by .90.

tee x co

Products>>Section A- RegO / ECII>>Globe and Angle Valves>>Page A-24