|
Home | Online Ordering | Products | Engineering & Construction | LPG Trucks & Fabrication | TEECO Topics | Contact TEECO | About TEECO |
Products>>Section A- RegO / ECII>>MultiValve Assemblies>>Page A-17
|
|
|
|
|
|
DOT and ASME Multivalves for Vapor Withdrawal
These Multivalves® permit vapor withdrawal from ASME containers up to 50 sq. ft. surface area and DOT containers up to 420 lbs. propane capacity. They allow on-site cylinder filling without interrupting gas service. The MultiBonnet® option allows quick and easy repair of bonnet.
| Part Number | Approximate Filling Rate Liquid Flow, GPM |
|
|||
| Pressure Drop Across Valve | |||||
| 10 PSIG | 25 PSIG | 50 PSIG | 100 PSIG | ||
| 6532A12.0 / 6532R12.0 | 11 | 16 | 23 | 28 | |
| 6542A12.0 / 6542R12.0 | 23 | 32 | 46 | 57 | |
| 6533A10.5 / 6533R10.5 | 11 | 16 | 23 | 28 | |
| 6533A11.7 / 6533R11.7 | |||||
| 6543A11.1 / 6543R11.1 | 23 | 32 | 46 | 57 | |
| 6543A11.7 / 6543R11.7 | |||||
| Part Number | Bonnet Style | Application | Container Connection | Service Connection | Filling Connection | Fixed Liquid Level Vent Valve Style | Dip Tube Length with Deflector | Pressure Relief Valve Setting | For Use in Cylinders w/ Propane Capacity Up to:** |
For Use in Containers with Surface Area Up to:*** |
Order |
| 6532A12.0 | Standard | ASME* | 3/4" M. NGT | F. POL (CGA 510) | 1 3/4" M. ACME | Knurled | 12.0" | 250 PSIG | --- | 43 Sq. Ft. | |
| 6532R12.0 | MultiBonnet | ||||||||||
| 6542A12.0 | Standard | 1" M. NGT | 53 Sq. Ft. | ||||||||
| 6542R12.0 | MultiBonnet | ||||||||||
| 6533A10.5 | Standard | DOT | 3/4" M. NGT | 10.5" | 375 PSIG | 420 lbs. Propane | --- | ||||
| 6533R10.5 | MultiBonnet | ||||||||||
| 6533A11.7 | Standard | 11.7" | |||||||||
| 6533R11.7 | MultiBonnet | ||||||||||
| 6543A11.1 | Standard | 11.1" | |||||||||
| 6543R11.1 | MultiBonnet | ||||||||||
| 6543A11.7 | Standard | 11.7" | |||||||||
| 6543R11.7 | MultiBonnet |
* UL rated flow capacities are: 6532A12.0-1180 SCFM/air, 6542A12.0-1530 SCFM/air.
** Per CGA Pamphlet S-1.1.
*** From NFPA, Appendix D.
ASME Multivalve for Vapor Withdrawal
These compact Multivalves® are especially suited for vapor withdrawal of ASME containers where compact groupings of components are necessary. Separate filler valves and pressure relief valves are required. MultiBonnet® allows quick and easy repair of bonnet.
|
Part Number |
Container Connection |
Service Connection | Vapor Equalizing Connection | Fixed Liquid Level Vent Valve Style | Dip Tube Length | For Use in Containrers w/ Surface Area Up to: | Order | |
| Connection Size | UL Listed Closing Flow | |||||||
| 7556R12.0 |
3/4" M. NGT |
F. POL (CGA 510) | 1 1/4" M. ACME | 4,200 CFH @ 100PSIG | Knurled | 12" | * | |
* Since these Multivalves® have no integral pressure relief valves, they can be used on any ASME container with an independent relief device sufficient for that tank’s capacity.
Note: As of 2007, RegO made a change to the body of the 7556R Series. The gauge connection was moved and outlet reduced from 1/4" to 1/8" F-NPT.
Products>>Section A- RegO / ECII>>Multivalve Assemblies>>Page A-17
|
|
|
|
