Home  |  Online Ordering  |  Products  |  Engineering & Construction  |  LPG Trucks & Fabrication  |  TEECO Topics  |  Contact TEECO  |  About TEECO  

Products>>Section A- RegO / ECII>>LPG Cylinder and Service Valves>>Page A-15

                                                                                                                                                  


NOTE: These valves incorporate an excess flow valve. Refer to L-500/Section F, for complete information regarding selection, operation and testing of excess flow valves.

Multivalve Assemblies - General Information

RegO Multivalve Assemblies - General Info and Design Features (PDF) 271 Kb.

RegO Multibonnet Assemblies - Applications and Features (PDF) 272 Kb.

ASME Multivalves for Vapor Withdrawal with Integral Relief Valve

These Multivalves® are designed for use in single opening ASME containers equipped with a 2 1/2" M. NPT riser. They can be used with underground ASME containers up to 639 sq. ft. surface area, and above ground ASME containers up to 192 sq. ft. surface area. A separate opening is required for liquid withdrawal. The MultiBonnet® is standard on this valve. The MultiBonnet® allows quick and easy repair of bonnet.

Part Number

Approximate Filling Rate Liquid Flow, GPM

G8475R-Series.gif (338527 bytes)

Pressure Drop Across Valve
10 PSIG 25 PSIG 50 PSIG 100 PSIG
G8475RV 42 72 98 125
G8475RW

 

Part Number 

Container Connection 

 Service Connection Filling Connection

Vapor Equalizing Connection

 Float Gauge Flange Opening Fixed Liquid Level Vent Valve Style Dip Tube Length UL Listed relief Valve Capacity For Use in Containers with Surface Area Up to: Order
Connection Size UL Listed Closing Flow
G8475RV 2 1/2" F. NPT F. POL (CGA 510) 1 3/4" M. ACME 1 1/4" M. ACME 4,200 CFH @ 100 PSIG Fits "JUNIOR" Size Knurled 30" * 2,020 SCFM / Air 83 Sq. Ft. Above ground
276 Sq. Ft. Underground
G8475RW 3,995 SCFM / Air 192 Sq. Ft. Above Ground
639 Sq. Ft. Underground

*Dip tube not installed, may be cut by customer to desired length.

ASME Multivalves for Vapor Withdrawal

These Multivalves® provide vapor withdrawal and filling of ASME containers. A separate pressure relief valve is required in addition to this valve. The MultiBonnet® is standard on this valve. MultiBonnet® allows quick and easy repair of bonnet.

Part Number Approximate Filling Rate Liquid Flow, GPM

8593AR.gif (276750 bytes)
Pressure Drop Across Valve
10 PSIG 25 PSIG 50 PSIG 100 PSIG
8593AR16.0 42 72 98 125

 

Part Number 

Container Connection 

 Service Connection Filling Connection

Vapor Equalizing Connection

 Fixed Liquid Level Vent Valve Style Dip Tube Length For Use in Containers with Surface Area Up to: Order
Connection Size UL Listed Closing Flow
8593AR16.0 1 1/2" M. NPT F. POL (CGA 510) 1 3/4" M. ACME 1 1/4" M. ACME 4,200 CFH @ 100 PSIG Knurled 16" * **

* Dip tube not installed, may be cut by customer to desired length.

** Since these Multivalves® have no integral pressure relief valves, they can be used on any ASME container with an independent relief device sufficient for that tank’s capacity.

 

 Products>>Section A- RegO / ECII>>LPG Cylinder and Service Valves>>Page A-15