Home  |  Online Ordering  |  Products  |  Engineering & Construction  |  LPG Trucks & Fabrication  |  TEECO Topics  |  Contact TEECO  |  About TEECO  

Products>>Section A- RegO / ECII>>LPG Cylinder and Service Valves>>Page A-12

                                                                                                                                                  


Tamper Resistant Cylinder Valve with Outlet Check for Vapor Withdrawal

This valve is designed for vapor withdrawal from and protection of DOT cylinders up to 100 lbs. propane capacity. Ideal for cylinders used in the field by construction crews, utility repair men and plumbers.

Part Number 

Container Connection 

 Service Connection

Fixed Liquid Level Vent Valve Style

Pressure relief Valve Setting

 For use in Cylinders with Propane Capacity up to: Approximate Filling Rate Liquid Flow, GPM Order
Pressure Drop Across Valves
10 PSIG 25 PSIG 50 PSIG 100 PSIG
9103T9F 3/4 M. NGT F. POL (CGA 510) None  375 PSIG 100 lbs. 5.0 7.6 10.7 14.9

9103T9F.gif (157514 bytes)

 

Cylinder Valve for RV and Small ASME System Vapor Withdrawal

Designed especially for vapor withdrawal service in small ASME containers with surface area up to 23.8 square feet. UL flow capacity is 645 CFM/air, per NFPA 58.

Part Number 

Container Connection 

 Service Connection

Fixed Liquid Level Vent Valve Style

Pressure relief Valve Setting

 For use in Cylinders w/ Propane Capacity up to: Flow Capacity SCFM/Air Order
9106CO 3/4 M. NGT F. POL (CGA 510) None  312 PSIG ASME Tanks* 645

* Surface area up to 23.8 square feet.

9106C0.gif (163385 bytes)

Cylinder Valve for Liquid Withdrawal

Equipped with excess flow valves and liquid withdrawal tubes, they are designed for liquid withdrawal of DOT cylinders up to 100 lbs. propane capacity. They are most often used with heavy BTU loads found in industrial uses.

Part Number 

Container Connection 

 Service Connection

Fixed Liquid Level Vent Valve Style

Dip Tube Length With Deflector

 Liquid Withdrawal Tube Length Order
9107K8A 3/4 M. NGT CGA 555 Knurled 11.6" 44"

 

Pressure relief Valve Setting

 For use in Cylinders with Propane Capacity up to: Approximate Filling Rate Liquid Flow, GPM Closing Flow (LP Gas)*
Vapor Liquid
Pressure Drop Across Valves 25 PSIG Inlet 100 PSIG Inlet
10 PSIG 25 PSIG 50 PSIG 100 PSIG
375 PSIG 100 lbs. 3.3 5.4 7.7 11.1 525 SCFH 1,000 SCFH 1.7 GPM

*Closing flows based on 3/8" O.D. withdrawal tube 44" long or less attached. IMPORTANT: 1/4" O.D. pigtails or POL connections for 1/4" O.D. pigtails should not be used with these valves. NOTES: To ensure proper functioning and maximum protection from excess flow valves, the cylinder valve should be fully opened and backseated when in use. These valves incorporate an excess flow valve. Refer to L-500 / Section F, for complete information regarding selection, operation and testing of excess flow valves.

9107K8A.gif (173392 bytes)

Products>>Section A- RegO / ECII>>LPG Cylinder and Service Valves>>Page A-12